HP 8000 2K PRIMER

  HP-8000 2K Primer/Surfacer

HP-8000 Premium 2K Primer-Surfacer with exceptionally high build properties. Very soft sanding, wet or dry after short dry times. HP-8000 Primer provides minimal shrinkage and the maximum in color holdout properties available. An Economical Lacquer Type fast dry!

Mix Ratio:

Component                                            Volume

HP-8000 2k Primer/Surfacer                            4

HP-8010 Activator                                          1

Reducer (Optional) Up to 1 Part

Viscosity

26-33 seconds in #2 Zahn Cup

Pot Life

1 hour at 70F

Gun Setups:

Conventional

Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

HVLP

Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

Air Pressures

Conventional

Siphon Feed: 35-45 psi at the gun

Gravity Feed: 30-40 psi at the gun

HVLP 8-10 psi at the gun

Application:

1. 
   
   Clean surface thoroughly using accepted body shop procedures.
2. 
   
   Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe.
3. 
   
   Apply 2-3 medium coats of HP-8000 with 10-15 minutes flash between coats.
4. 
   
   Do not apply more primer after 1 hour from completion.

HP-8000 2k Primer/Surfacer

Flash/Dry Times (Air Dry):

Flash Between Coats: 10-15 minutes

Wet Sanding: 2 hours

Dry Sanding: 2 hours

Safety:

Before using any Harpea products be sure to read all safety warnings and MSDS. Please read all directions carefully.

For professional use only by trained painters. Not for sale or use by the general public.

Technical Data & Physical Properties:

Color Buff/Grey Sprayable Viscosity 26-33 sec. #2Z

Pot Life 1 hour Mix Ratio 4:1

Weight Solids 64% Volume Solids 47%

Weight per Gallon 10.7 lbs Color Holdout Excellent

Flash Point 22C Solvent Resistance Excellent

Package VOC 3.60 lbs/gal RTS VOC 3.70 lbs/gal