HP-8000
Premium 2K Primer-Surfacer with exceptionally high build properties.
Very soft sanding, wet or dry after short dry times. HP-8000 Primer
provides minimal shrinkage and the maximum in color holdout
properties available. An Economical Lacquer Type fast dry!
Mix
Ratio:
Component Volume
HP-8000
2k Primer/Surfacer 4
HP-8010
Activator 1
Reducer
(Optional) Up to 1 Part
Viscosity
26-33
seconds in #2 Zahn Cup
Pot Life
1
hour at 70F
Gun
Setups:
Conventional
Siphon
Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Gravity
Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
HVLP
Siphon
Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Gravity
Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Air Pressures
Conventional
Siphon
Feed: 35-45 psi at the gun
Gravity
Feed: 30-40 psi at the gun
HVLP 8-10 psi at the gun
Application:
Clean surface thoroughly using accepted body shop procedures.
Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe.
Apply 2-3 medium coats of HP-8000 with 10-15 minutes flash between coats.
Do not apply more primer after 1 hour from completion.
HP-8000
2k Primer/Surfacer
Flash/Dry
Times (Air Dry):
Flash
Between Coats: 10-15 minutes
Wet
Sanding: 2 hours
Dry
Sanding: 2 hours
Safety:
Before
using any Harpea products be sure to read all safety warnings and
MSDS. Please read all directions carefully.
For
professional use only by trained painters. Not for sale or use by
the general public.
Technical
Data & Physical Properties:
Color Buff/Grey Sprayable
Viscosity 26-33 sec. #2Z
Pot
Life 1 hour Mix Ratio 4:1
Weight
Solids 64% Volume Solids 47%
Weight
per Gallon 10.7 lbs Color Holdout Excellent
Flash
Point 22C Solvent
Resistance Excellent
Package
VOC 3.60 lbs/gal RTS VOC 3.70 lbs/gal
This is really one of the best primer's I have ever used. And I have used them all in my long time profession! The best is the savings!!
ReplyDeleteReally nice primer with high solids...sands well and fills nice. I'll be buying much more of it!
ReplyDelete