HP-5310 Direct to Metal (DTM) Primer HP-5311(Direct to Rust) Black

HP-5310 Premium 2k DTM Primer

HP-5310 Premium 2K DTM Primer-Surfacer with exceptionally high build and direct-to-metal properties. Very soft sanding, wet or dry after short dry times. HP-5310 Primer provides minimal shrinkage and the maximum in color

holdout properties available. BUFF/GREY

HP-5311 BLACK is the same product as 5310, BUT with HALOX 630 that allows you to paint OVER RUST!  Great for restorations!  This product is extremely THICK! Must reduce 15-20% to get thru primer gun

Mix Ratio:

Component                                                 Volume

HP-5310 Premium 2k DTM Primer                        4

HH-3100 Activator                                             1

Reduction of up to 10-15% with Tamco Universal Urethane reducers (HR-Series)

OPTIONAL (for Grey)  MIX  4:1:1  as a SEALER (4 parts primer 1 part HH3100, 1 part HR reducer)

Viscosity

26-33 seconds in #2 Zahn Cup

Pot Life

1 hour at 70F

Gun Setups:

Conventional

Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

HVLP

Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)

Air Pressures

Conventional

Siphon Feed: 35-45 psi at the gun

Gravity Feed: 30-40 psi at the gun

HVLP 8-10 psi at the gun

Application:

1. Clean surface thoroughly using accepted body shop procedures.
2. Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe.
3. Apply 2-3 medium coats of HP-5310 with 10-15 minutes flash between coats.
4. Do not apply more primer after 1 hour from completion.

Flash/Dry Times (Air Dry):

Flash Between Coats: 10-15 minutes

Wet Sanding: 1 hour

Dry Sanding: 1 hour

Safety:

Before using any Harpea products be sure to read all safety warnings and MSDS. Please read all directions carefully.

For professional use only by trained painters. Not for sale or use by the general public.

Technical Data & Physical Properties:

Color Grey Sprayable Viscosity 26-33 sec. #2Z

Pot Life 1 hour Mix Ratio 4:1

Weight Solids 64% Volume Solids 47%

Weight per Gallon 10.7 lbs Color Holdout Excellent

Flash Point 22C Solvent Resistance Excellent

Package VOC 3.99 lbs/gal RTS VOC 3.20 lbs/gal

COLOR-MAX 2800 Beige 2K Urethane Primer

ColorMax 2800 Beige Primer-Surfacer is an exceptionally high build primer for when you want a light yellowish-beige primer. Fills great - very soft sanding, wet or dry after short dry times. ColorMax 2800 Primer provides minimal shrinkage and the maximum in color holdout properties available.. NOT direct to metal.

Mix Ratio:

Component                                                                Volume

ColorMax 2800 Beige Premium 2k Primer                         4

2850  Activator                                                             1

Reduction of up to 10-15% with Tamco Universal Urethane reducers (HR-Series)

Viscosity

60 seconds in #2 Zahn Cup

Pot Life

1 hour at 70F

Gun Setups:

Conventional

Siphon Feed: 1.8 mm – 2.0 mm (0.063” – 0.079”)

Gravity Feed: 1.8 mm – 2.0 mm (0.063” – 0.079”)

HVLP

Siphon Feed: 1.8 mm – 2.0 mm (0.063” – 0.079”)

Gravity Feed: 1.8 mm – 2.0 mm (0.063” – 0.079”)

Air Pressures

Conventional

Siphon Feed: 35-45 psi at the gun

Gravity Feed: 30-40 psi at the gun

HVLP 8-10 psi at the gun

Application:

1. Clean surface thoroughly using accepted body shop procedures.
2. Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe.
3. Apply 2-3 medium coats of ColorMax Primer with 10-15 minutes flash between coats.
4. Do not apply more primer after 1 hour from completion.

Flash/Dry Times (Air Dry):

Flash Between Coats: 10-15 minutes

Wet Sanding: 1 hour

Dry Sanding: 1 hour

Safety:

Before using any Tamco products be sure to read all safety warnings and MSDS. Please read all directions carefully.

For professional use only by trained painters. Not for sale or use by the general public.

Technical Data & Physical Properties:

Color Beige Sprayable Viscosity 60 sec. #2Z

Pot Life 1 hour Mix Ratio 4:1

Weight Solids 64% Volume Solids 50%

Weight per Gallon 10.84 lbs

Flash Point 22C Solvent Resistance Excellent

Package VOC 3.0 lbs/gal RTS VOC 2.5 lbs/gal with exempt solvents

Tamco 3 Plus 1  EURO- 2K Urethane Primer

BEIGE

Tamco's 3 plus 1 Beige Primer is a VERY high build primer for when you want a truly European Resined hultra high build primer for blocking and filling.  Fills great - very soft sanding, wet or dry after short dry times. 3 Plus 1 Primer provides minimal shrinkage and the maximum in color holdout . NOT direct to metal. This is packaged 3 quarts in a round gallon can! Sold by Kit - Get 3 quarts of Primer and 1 Quart of Hardener.

Mix Ratio:

Component                                                                Volume

Tamco 3 Plus 1 Beige Premium 2k Primer                        3

3 Plus 1  Activator                                                        1

Reduction of up to 15-20% with Tamco Universal Urethane reducers (HR-Series) will be necessary!

Viscosity

76 seconds in #2 Zahn Cup

Pot Life

1 hour at 70F

Gun Setups:

Conventional

Siphon Feed: 2.0 mm (0.063” – 0.079”)

Gravity Feed: 2.0 mm (0.063” – 0.079”)

HVLP

Siphon Feed: 1.8 mm – 2.0 mm (0.063” – 0.079”)

Gravity Feed: 1.8 mm – 2.0 mm (0.063” – 0.079”)

Air Pressures

Conventional

Siphon Feed: 35-45 psi at the gun

Gravity Feed: 30-40 psi at the gun

HVLP 8-10 psi at the gun

Application:

1. Clean surface thoroughly using accepted body shop procedures.
2. Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe.
3. Apply 2-3 medium coats of 3 plus 1 Primer with 10-15 minutes flash between coats.
4. Do not apply more primer after 1 hour from completion.

Flash/Dry Times (Air Dry):

Flash Between Coats: 10-15 minutes

Wet Sanding: 1 hour

Dry Sanding: 1 hour

Safety:

Before using any Tamco products be sure to read all safety warnings and MSDS. Please read all directions carefully.

For professional use only by trained painters. Not for sale or use by the general public.

Technical Data & Physical Properties:

Color Beige Sprayable Viscosity 76 sec. #2Z

Pot Life 1 hour Mix Ratio 4:1

Weight Solids 68% Volume Solids 52%

Weight per Gallon 9.24 lbs (3/4 fill)

Flash Point 22C Solvent Resistance Excellent

Package VOC 2.8 lbs/gal RTS VOC 2.4 lbs/gal with exempt solvents