TAPE TRACKING

An imprinted line or texture in the dried paint film following the use of masking tape.

CAUSE

(A) Finish not dry before taping, causing solvent entrapment between finish and tape.

(B) Using a non-automotive tape for multi-color finishes. Solvents from additional color soak through the tape and into the previous color.

REPAIR

(1) Compound and polish to remove texture.

(2) Or, sand with 1500-2000 grit sandpaper, compound and polish to restore gloss.

(3) Or, sand and refinish.

PREVENTION

(A) Allow the finish to thoroughly dry before masking.

(B) Use only high quality automotive masking tape.

(C) Determine if it is safe to tape on freshly painted surfaces by applying a small piece of tape to the surface for 10-15 minutes; remove and check for imprinting.

(D) De-tack the tape before applying by pulling the adhesive side of the tape over your pant leg or between your fingers.

(E) Remove the tape as quickly as possible after applying additional color(s).

(A) Finish not dry before taping, causing solvent entrapment between finish and tape.

(B) Using a non-automotive tape for multi-color finishes. Solvents from additional color soak through the tape and into the previous color.